Icom ID-1 Instruction Manual - Page 44
Tuning step selection
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5 BASIC OPERATION Tuning step selection D Selecting with the application ➥ Click [TS], then select the desired tuning step from the list. • 5, 6.25, 10, 12.5, 20, 25, 50 and 100 kHz tuning steps are available. Click D Selecting with the RC-24 q Push [MHz• •2] for 0.5 sec. • "TS" and the selected tuning step appear. [DIAL] [MHz• •2] w Rotate [DIAL] to select the desired tuning step. • 5, 6.25, 10, 12.5, 20, 25, 50 and 100 kHz tuning steps are available. • When no operation is performed for 5 sec., both "TS" and tuning step selection indication disappear and the transceiver return to normal condition. "✔" appears for the selected tuning step 37
37
5
BASIC OPERATION
■
Tuning step selection
D
Selecting with the application
➥
Click [TS], then select the desired tuning step from the list.
•
5, 6.25, 10, 12.5, 20, 25, 50 and 100 kHz tuning steps are avail-
able.
D
Selecting with the RC-24
q
Push [MHz
•
•
2] for 0.5 sec.
•“
TS
”
and the selected tuning step appear.
w
Rotate [DIAL] to select the desired tuning step.
•
5, 6.25, 10, 12.5, 20, 25, 50 and 100 kHz tuning steps are avail-
able.
•
When no operation is performed for 5 sec., both
“
TS
”
and tun-
ing step selection indication disappear and the transceiver return
to normal condition.
[DIAL]
[MHz
•
•
2]
“
✔
”
appears for the
selected tuning step
Click