Icom ID-1 Instruction Manual - Page 70
once or twice to exit call sign select
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
8 REPEATER OPERATION- VOICE D Setting from the RC-24 q Push [MODE] to select DV (Digital voice) mode. • "DV" appears. w Set the desired receive frequency (repeater output frequency). e Push [RP•4] several times to select the repeater mode. • Select "RP-" or "RP+." [RP•4] [MODE] 1294.500 DV RP- LOW 00 rPush [CS• •1] to enter call sign select mode, then rotate [DIAL] to select the desired station call sign. • When sending a CQ, push [BK• •.] for 0.5 sec. to displays " ." • Refer to the pages 42 to 44 for call sign setting when the desired call sign is not programmed. tPush [CS• •1] one more time to select "RPT1," then rotate [DIAL] to select the desired repeater call sign. • Refer to the pages 42 to 44 for call sign setting when the desired call sign is not programmed. • Push [CS• •1] one more times again to select "RPT2" then set the desired repeater call sign when using the repeater linking capability. • When linking repeaters via internet network (gateway connection), pushing [ ] for 0.5 sec. may be necessary depending on the repeater system. [DIAL] [CS• •1] LOW RPT1:IDRP01 Gå E s00:STATION1 W yPush [CS• •1] once or twice to exit call sign select mode. u Push [PTT] to transmit, release [PTT] to receive. i To clear "RP-" or "RP+" push [RP•4] once or twice. 63