Icom ID-1 Instruction Manual - Page 78
Memory/call Operation
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
10 MEMORY/CALL OPERATION General description The transceiver has 105 memory channels including 2 scan edge memory channels (1 pair), and 3 call channels. Each of these channels can be individually programmed with operating frequency (pgs. 35, 36), operating mode (p. 38), repeater mode (pgs. 57, 58, 61-63), offset frequency (p. 60), subaudible tone encoder or tone squelch and its tone frequency (p. 59), Digital squelch and its station call sign (pgs. 92-99), repeater call signs (RPT1 and RPT2; pgs. 61-63), skip information* (p. 88) and memory names (pgs 80-82). *Except scan edges and call channels. Memory channel selection D Selecting with the application q Click [V/M] to select memory mode. • "MEMO" appears. Click Appears 71 • Dial selection wLeft click or right click on [DIAL] to increase or decrease the memory channel number. • The programmed memories can only be selected. • Direct channel number input w Click on [F.INP] to display keypad screen. eClick the appropriate numeral keys to select the desired memory channel. • When selecting a channel 00 to 09, click [0] first then click [0]-[9], or click [0]-[9] then click [ENT]. • PC keyboard can also be used for the direct channel selection. • Selecting from Memory Channel screen w Display the Memory channel screen. - Select "Edit Memory Channel(M)..." in View menu. - Click " " in tool bar. - Press [F6] key on the PC keyboard. eDouble click, or right click the desired channel's "Select" cell, then select "+ : Move to this CH" to select the desired memory channel. • Click the desired memory channel's "Select" cell, then press [Enter] while pressing [Ctrl] key on the PC keyboard. Double click the desired channel's "Select" cell. Select "+ : Move this CH."