Icom ID-1 Instruction Manual - Page 84
Copying a memory contents
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
10 MEMORY/CALL OPERATION Copying a memory contents This function copies a memory channel's contents to VFO (or another memory/call channel). This is useful when searching for signals around a memory channel frequency and for recalling the offset frequency, subaudible tone frequency etc. D Copying from the application - main screen qSelect the desired memory/call channel to be copied with [DIAL] or keypad. • Click [V/M] or [CALL] to select memory or call channel, if necessary. w Click [MW] to display the Memory programming screen. eClick to select the desired mode (MEMORY, CALL or VFO) to be copied to. rSelect the desired memory or call channel number by right clicking or left clicking on the [DIAL] in the screen. Click to select Shows the selected memory channel number and previously programmed frequency. Right click to move memory channel number up. Left click to move memory channel number down. tClick [MW] on the Memory programming screen to copy. yTo close the Memory programming screen, click [MW] on the main screen again or click " ." 77 D Copying from the application - Memory Channel screen q Display the Memory channel screen. - Select "Edit Memory Channel(M)..." in View menu. - Click " " in tool bar. - Press [F6] key on the PC keyboard. wRight click any cell of the desired memory/call channel to be copied, except "Select," then select "Copy(C)" from the displayed menu as below. • After selecting a cell of the desired memory channel, press [C] key while [Ctrl] key is pressed and held- these key actions are the same as the mouse operation above. eRight click any cell of the desired memory/call channel to be copied to, except "Select," then select "Paste(V)." • After selecting a cell of the desired memory channel, press [V] key while [Ctrl] key is pressed and held- these key actions are the same as the mouse operation above. Select to copy. Select to paste. NOTE: Copying a memory/call channel contents to VFO is not possible from the Memory Channel screen.