Icom ID-1 Instruction Manual - Page 64

Accessing an FM repeater

Get Icom ID-1 PDF manuals and user guides View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

8 REPEATER OPERATION- VOICE Accessing an FM repeater D Setting from the application q Click [MODE] to select FM mode. • "FM" appears. w Set the desired receive frequency (repeater output frequency). eClick [RP] several times to select minus or plus duplex. • "RP-" or "RP+" appears. • 12 MHz is set as the default for the USA version. Refer to page 60 for offset frequency setting. r Click [TONE] to turn the repeater tone encoder ON. • "TONE" appears. • 88.5 Hz is set as the default. Refer to page 59 for tone frequency setting. NOTE for the USA version: During the auto repeater function ON, the steps e and r are not necessary, depending on the settings. See page 106 for the auto repeater function. Appear Click t Push and hold [PTT] to transmit. • The display frequency automatically changes to the transmit fre- quency (repeater input frequency). • If the repeater indicator, "RP-" or "RP+," and " " blink, con- firm that the duplex direction and the offset frequency (p. 60) is set correctly. Displays transmit frequency. Indicates transmit output power level. Appears during transmit. y Release [PTT] to receive. uClick [MONI] to check whether the other station's transmit signal can be received directly. iTo return to simplex operation, click [RP] several times to clear the "RP-" or "RP+" indicator. oTo turn OFF the repeater tone encoder, click [TONE] sev- eral times until no tone indicators appear. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
57
8
REPEATER OPERATION
—
VOICE
■
Accessing an FM repeater
D
Setting from the application
q
Click [MODE] to select FM mode.
•“
FM
”
appears.
w
Set the desired receive frequency
(repeater output frequency)
.
e
Click [RP] several times to select minus or plus duplex.
•“
RP
–”
or
“
RP+
”
appears.
•
12 MHz is set as the default for the USA version. Refer to page
60 for offset frequency setting.
r
Click [TONE] to turn the repeater tone encoder ON.
•“
TONE
”
appears.
•
88.5 Hz is set as the default. Refer to page 59 for tone frequency
setting.
NOTE for the USA version:
During the auto repeater
function ON, the steps
e
and
r
are not necessary, de-
pending on the settings. See page 106 for the auto re-
peater function.
t
Push and hold [PTT] to transmit.
•
The display frequency automatically changes to the transmit fre-
quency (repeater input frequency).
•
If the repeater indicator,
“
RP
–”
or
“
RP+,
”
and
“
”
blink, con-
fi
rm that the duplex direction and the offset frequency (p. 60) is
set correctly.
y
Release [PTT] to receive.
u
Click [MONI] to check whether the other station
’
s transmit
signal can be received directly.
i
To return to simplex operation, click [RP] several times to
clear the
“
RP
–”
or
“
RP+
”
indicator.
o
To turn OFF the repeater tone encoder, click [TONE] sev-
eral times until no tone indicators appear.
Displays transmit frequency.
Indicates transmit output power level.
Appears during transmit.
Appear
Click