Icom ID-1 Instruction Manual - Page 85
Memory clearing
View all Icom ID-1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
MEMORY/CALL OPERATION 10 D Copying with the RC-24 qSelect the desired memory or call channel with [DIAL] or keypad to be copied. • Push [V/M] or [CALL] to select memory mode or call channel, if desired. w Push [MW•6] momentarily. • The previously selected memory channel number blinks. [MW•6] 1294.500 FM LOW M00 eRotate [DIAL] to select VFO, the desired memory or call channel to be programmed. • Select "M--" when copying to VFO. • Select "M00" to "M99" when copying to memory channel. • Select "MC1" to "MC3" when copying to call channel. • The display shows the currently programmed frequency and set- tings. • Push [V/M] to select a blank memory channel, push [CALL] to select call channel 1. r Push [MW•6] for 0.5 sec. to program. • 3 beeps sound. Memory clearing Contents of programmed memories can be cleared (blanked), if desired. D Clearing from the application - main screen q Click [MW] to display the Memory programming screen. w Click to select the "MEMORY." eSelect the desired memory channel number to be cleared by right clicking or left clicking on the [DIAL] in the screen. Click to select. 10 Shows the selected memory channel number and previously programmed frequency. Right click to move memory channel number up. Left click to move memory channel number down. rClick [M-CL] on the Memory programming screen to clear the contents. tTo close the Memory programming screen, click [MW] on the main screen again or click " ." 78