Kenmore 18221 Owners Manual - Page 36
Removing, Inserting
View all Kenmore 18221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Removing the hook cover plate f _1_Hook cover plate release button _2_Hook cover plate Slide the hook cover plate release button _l_'to the right, / and remove the cover plate _2_. / J Inserting the bobbin f \ LI_ End of thread (2_ Notch [] (3_.Notch (47Threading diagram [] Place a bobbin in the bobbin holder with the thread running off counterclockwise. / / [] Guide the thread into notch _2_,onthe front side of [] the bobbin holder. Draw the thread to the left, sliding it between the tension spring blades. [] Continue to draw the thread lightly until the thread slips [] into notch _%. Pull out about 6" (15.0 cm) of thread. / []Attach the hook cover plate. Check the threading by [] referring to the diagram _4_,shownon the hook cover plate.
Removing
the hook cover
plate
_1_Hook cover plate release button
_2_Hook cover plate
Slide the hook cover plate release button _l_'to the right,
and remove the cover plate _2_.
Inserting
the bobbin
LI_ End of thread
(2_Notch
(3_.Notch
(47Threading
diagram
[]
Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
[]
Guide the thread into notch _2_,onthe front side of
the bobbin holder.
Draw the thread to the left, sliding
it
between the tension spring blades.
[]
Continue to draw the thread lightly until the thread slips
into notch _%. Pull out about 6"
(15.0 cm) of thread.
[]Attach
the hook cover plate. Check the threading
by
referring to the diagram _4_,shownon the hook cover plate.
f
f
[]
[]
[]
[]
/
/
/
/
/
J
\