Kenmore 18221 Owners Manual - Page 88
opening with the buttonhole
View all Kenmore 18221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
_3_M. ark for placement of buttonhole f @ Starting point [] @ Slider @ There should be no gap. _7_S. pring holder (89' Difference [] Draw both threads to the left under the foot. Insert the garment under the foot, and lower the needle into the fabric to the starting point. Then lower the automatic buttonhole foot. Sew slowly and stop the machine at the starting point when the buttonhole is completed. / /' / [] Remove the fabric and place a pin just before the bartack at each end, to prevent cutting bartacks. Cut the opening with the buttonhole opener. [] To sew another buttonhole, you must reset the machine. Reset by shifting the stitch selector in either direction, _9_or_, to the next setting. Then shift the selector back to the buttonhole setting "[I ". [] When finished, push the buttonhole lever up as far as it will go. 76 > J J -x k_ J J