Kenmore 18221 Owners Manual - Page 58
To Drop, or Raise, the Feed, Darning
View all Kenmore 18221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
To Drop or Raise the Feed Dogs f The drop feed dogs lever is located underneath the free arm bed on the back side of the machine. _1:To drop the feed dogs, push the lever in the direction of the arrow, as illustrated. _2_To raise the feed dogs, push the lever in the direction of the arrow, as illustrated, and turn the handwheel toward you. Feed dogs must be up for normal sewing. Darning _1_S, titch selector: _2) Stitch width: @ Stitch length: _4_N, eedle thread tension: @ Pressure adjusting lever: '_6_Presser foot A: _,_7P_r.esser foot F: _8_Feed dogs: 4 to 6 6.5 Any 2 to 6 0 Zigzag foot Satin stitch foot Dropped Drop the feed dogs. Center the hole in the fabric on an embroidery hoop, as shown. Lower the presser foot F and sew at a slow speed. Move the fabric back and forth slowly until the darning area is covered. Turn the fabric 1/4 turn (90°), and sew another layer of stitching over the first layer. After darning is completed, return the pressure adjusting lever to 3 for normal sewing. NOTE: If the fabric is thin or badly damaged, use a separate piece of fabric under the hole to reinforce it. I II I II 46