Kenmore 18221 Owners Manual - Page 92
Corded, Buttonhole
View all Kenmore 18221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Corded Buttonhole [] Use the same procedure as the automatic buttonhole procedure. * Set the stitch width to match the thickness of the cord used. With the buttonhole foot raised, hook the filler cord on the spur at the back of the buttonhole foot. Bring the ends toward you under the buttonhole foot, clearing the front end. Hook the filler cord into the forks _2)on the front of the automatic buttonhole foot [ R] to hold them tight. Lower the needle into the garment where the buttonhole will start, and lower the foot. _1_Spur _2_F' orks f [] / [] Depress the foot control gently, and sew the buttonhole. [] Each side of the buttonhole and the bartacks will be sewn over the cord. Remove the fabric from the machine, and cut the sewing threads only. _3_Needle thread (Top thread) _4_Bobbin thread (Bottom thread) [] Pull the loose ends of the filler cord to tighten it. [] Tie the ends in a knot, or thread them through a hand- sewing needle. Draw them to the wrong side of the fabric and knot. \ / / / J 80