Home » Xerox Manuals » Multifunction Devices » Xerox 6400XF » Manual Viewer

Xerox 6400XF WorkCentre 6400 System Administrator Guide - Page 10

Overview, Configuration Steps - review

UPC - 095205759334

Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Introduction Overview This guide is designed for a system administrator with network administrator rights who has knowledge of networking concepts as well as experience creating and managing network user accounts. This guide will help you install, configure, and manage the printer on a network. Notes: • • Network features are not available if you are connected over USB. Embedded fax features are not available for all printer models. Configuration Steps When configuring the printer for the first time, Xerox suggests that you follow these steps in this order: 1. Connect an Ethernet cable from your printer to the network. 2. Confirm that your printer is recognized on your network. By default, the printer is configured to receive an IP address from a DHCP server over a TCP/IP network. If you have another type of network, or want to assign a static IP address, see Enabling TCP/IP on page 22. 3. Provide basic information such as your location, time zone, and date and time preferences, by completing the Installation Wizard and the Quick Setup Home wizard. For details, see Quick Setup Home on page 15. 4. Print a Configuration Report listing the printer's current configuration. Review the report and locate the printer's IP address. For details, see Configuration Report on page 15. 5. Open a Web browser andtype the IP address of your printer to access CentreWare Internet Services (CentreWare IS). CentreWare IS is administration and configuration software installed on the printer's embedded Web server. For more information see Accessing CentreWare IS on page 17. Note: Most configuration settings are located on the Properties tab in CentreWare IS. If you set your printer to Locked in the Installation Wizard, you must log in as the system administrator. For details, see Accessing CentreWare IS on page 17. 6. Print the configuration checklist. The Configuration Checklist lists provides space for you to write down important information as you go through the configuration process. Use it to record information about your network settings, including passwords, network paths, and server addresses. For details, see Accessing the Configuration Report on page 18. 7. Configure Authentication. For details, see Setting up Access Rights on page 54. 8. Configure Security. For details, see Security on page 53. 9. Enable services in CentreWare IS. For details, see Enabling Services on page 19. 10. Configure Print, Scan, and Fax features. For details, see Printing on page 81, Scanning on page 99, and Fax on page 119. 11. Configure Accounting. For details, see Accounting on page 141. 10 WorkCentre 6400 Multifunction Printer System Administrator Guide

Section	Page
Contents	3
Introduction	9
Overview	10
Configuration Steps	10
More Information	11
Initial Setup	13
Physical Connection	14
Initial Setup at the Control Panel	15
The Installation Wizard	15
Quick Setup Home	15
Configuration Report	15
System Administrator Access at the Control Panel	15
Manually Setting the Printer’s Ethernet Interface Speed	16
Assigning a Network Address	16
Initial Setup in CentreWare IS	17
Accessing CentreWare IS	17
Locking or Unlocking the Printer	17
Changing the System Administrator Password	17
Accessing the Configuration Report	18
Using the Configuration Overview Page	18
Assigning a Name and Location to the Printer	18
Enabling Services	19
Network Configuration	21
TCP/IP	22
Enabling TCP/IP	22
Configuring TCP/IP Settings at the Control Panel	22
Configuring TCP/IP Settings in CentreWare IS	23
SLP	27
SNMP	28
Configuring SNMP	28
Editing SNMP v1/v2c Properties	28
Editing SNMP v3 Settings	29
SNMP Advanced Settings	29
SSDP	31
LPR/LPD	32
Enabling LPR/LPD	32
Raw TCP/IP Printing	33
Basic Settings	33
Advanced Settings	33
SMTP	35
Configuring SMTP Server Settings	35
LDAP	37
Configuring LDAP/LDAPS Server Settings	37
Configuring Contexts for LDAP	38
Defining User Mappings	38
Configuring Authorization Access by Groups	39
Configuring Filters for LDAP	41
POP3	42
HTTP	43
Enabling HTTP	43
Configuring HTTP Settings	43
Proxy Server	44
NTP	45
AppleTalk	46
Enabling AppleTalk on the printer	46
NetWare	47
Configuring NetWare Settings	47
Microsoft Networking	49
Configuring Microsoft Networking	49
Configuring WINS	49
WSD	50
Enabling WSD	50
Security	53
Setting up Access Rights	54
Overview	54
Local Authentication	55
Network Authentication	56
Authentication Using a Card Reader System	59
Controlling Access to Tools and Features	61
Controlling Access for All Users	61
Controlling Access for an Individual User or Group	61
Digital Certificates	62
Installing a Digital Certificate	62
Managing Trusted Certificate Authorities	63
Secure HTTP (SSL)	65
Enabling Secure HTTP (SSL)	65
IPsec	66
Enabling IPsec	66
Managing Actions	66
Managing Protocol Groups	69
Managing Host Groups	69
Managing Security Policies	70
802.1X	71
Enabling and Configuring 802.1X	71
Stored Data Encryption	73
Overwriting Image Data	74
Manually Deleting Image Data	74
Scheduling Routine Deletion of Image Data	74
PostScript Passwords	76
IP Filtering	77
Creating an IP Filter Rule	77
Editing or Deleting IP Filter Rules	77
Arranging the Execution Order of IP Filter Rules	78
Audit Log	79
Enabling Audit Log	79
Saving an Audit Log	79
Interpreting the Audit Log	79
Printing	81
Saving and Reprinting Jobs	82
Enabling the Reprint Saved Jobs Feature	82
Creating and Managing Saved Jobs Folders	82
Saving and Printing Jobs	83
Backing up Saved Jobs	84
Restoring Saved Jobs	84
Managing Banner Sheet Printing Options	86
Enabling Banner Sheet Printing in CentreWare IS	86
Enabling Banner Sheet Printing for LPR Print Jobs	86
Enabling Banner Sheet Printing at the Control Panel	86
Enabling Banner Sheet Printing in the Printer Driver	86
UNIX, Linux, and AS/400 Printing	88
Xerox Services for UNIX Systems (XSUS)	88
Supported Printing Models	88
Installing XSUS	88
Printing from a Linux Workstation	90
AS/400	90
Managing Copy Functions	93
Specifying Default Copy Settings	94
Changing the Reading Order	95
Creating Copy Feature Presets	96
Edge Erase Presets	96
Image Shift Presets	96
Reduce/Enlarge Presets	97
Scanning	99
Scanning to a Folder on the Printer	100
Enabling or Disabling Scan to Mailbox	100
Setting Scan Policies	100
Managing Folders and Scanned Files	101
Scanning to an Email Address	104
Editing Default Scan Settings	104
Managing the Email Address Book	104
Troubleshooting Scan to Email	104
Workflow Scanning	106
Configuring Workflow Scanning	106
Configuring File Repository Settings	106
Configuring the Default Template	111
Configuring Workflow Scanning General Settings	112
Setting Scanned Image File Naming Conventions	113
Configuring Template Pool Repository Settings	113
Updating the List of Templates at the Control Panel	114
Configuring a Validation Server	114
Troubleshooting Workflow Scanning	115
Scanning to a User’s Home Folder	116
Configuring Scan to Home	116
Configuring the Printer for the Xerox Scan Utility	117
Fax	119
Embedded Fax	120
Enabling Embedded Fax	120
Configuring Embedded Fax Settings	120
Setting Fax Defaults	121
Setting Transmission Defaults	123
Fax Mailboxes	124
Fax Reports	126
Chain Dialing	127
Fax Polling	127
Troubleshooting Embedded Fax	129
Server Fax	131
Configure a Server Fax Filing Repository	131
Configure Server Fax Default Settings	133
Troubleshooting Server Fax	134
Internet Fax	135
Configuring Default Internet Fax Settings	135
Configuring Internet Fax Receive Settings	136
Internet Fax Addresses	137
Troubleshooting Internet Fax	137
LAN Fax	138
Sending a LAN Fax	138
Adding a Fax Recipient	138
Adding a Recipient from a Personal Phonebook	138
Setting up a Cover Sheet	139
Setting LAN Fax Options	139
Editing the Phonebook	140
Accounting	141
Xerox Standard Accounting	142
Enabling Xerox Standard Accounting	142
Creating a Group Account	142
Creating a New User Account and Setting Usage Limits	143
Creating a General Account	143
Maximum Usage Limits	144
Resetting Usage Limits	144
Printing a Report	145
Network Accounting	146
Enabling and Configuring Network Accounting	146
Troubleshooting Network Accounting	147
Enabling Accounting in Print Drivers	148
Administrator Tools	149
Monitoring Alerts and Status	150
Alerts	150
Energy Saving Settings	152
Touch Screen Settings	153
Setting the Default Touch Screen View	153
System Time Out	153
Taking the Printer Offline	154
SMart eSolutions and Billing Information	156
SMart eSolutions	156
View Usage and Billing Information	157
Cloning	159
Address Books	161
Internet Fax and Email Address Book	161
Fax Address Book	162
LAN Fax Address Book	162
Font Management Utility	163
Network Logs	164
Downloading a Network Log to a USB Memory Stick	164
Downloading a Network Log from CentreWare IS	164
Customizing Printer Contact Information	165
Updating the Printer Software	166
Manual	166
Auto Upgrade	167
Customization and Expansion	169
Xerox Extensible Interface Platform (EIP)	170
Enabling Extensible Services	170
Auxiliary Interface Kit	171
Audit Log Event Identification Numbers	173
Audit Log Event Identification Numbers	174

Match case Limit results 1 per page

Introduction

WorkCentre 6400 Multifunction Printer

System Administrator Guide

Overview

This guide is designed for a system administrator with network administrator rights who has

knowledge of networking concepts as well as experience creating and managing network user

accounts.

This guide will help you install, configure, and manage the printer on a network.

Notes:

•

Network features are not available if you are connected over USB.

•

Embedded fax features are not available for all printer models.

Configuration Steps

When configuring the printer for the first time, Xerox suggests that you follow these steps in this order:

Connect an Ethernet cable from your printer to the network.

Confirm that your printer is recognized on your network. By default, the printer is configured to

receive an IP address from a DHCP server over a TCP/IP network. If you have another type of

network, or want to assign a static IP address, see

Enabling TCP/IP

on page 22.

Provide basic information such as your location, time zone, and date and time preferences, by

completing the Installation Wizard and the Quick Setup Home wizard. For details, see

Quick Setup

Home

on page 15.

Print a Configuration Report listing the printer’s current configuration. Review the report and

locate the printer’s IP address. For details, see

Configuration Report

on page 15.

Open a Web browser andtype the IP address of your printer to access CentreWare Internet

Services (CentreWare IS). CentreWare IS is administration and configuration software installed on

the printer’s embedded Web server. For more information see

Accessing CentreWare IS

page 17.

Note:

Most configuration settings are located on the Properties tab in CentreWare IS. If you set

your printer to Locked in the Installation Wizard, you must log in as the system administrator. For

details, see

Accessing CentreWare IS

on page 17.

Print the configuration checklist. The Configuration Checklist lists provides space for you to write

down important information as you go through the configuration process. Use it to record

information about your network settings, including passwords, network paths, and server

addresses. For details, see

Accessing the Configuration Report

on page 18.

Configure Authentication. For details, see

Setting up Access Rights

on page 54.

Configure Security. For details, see

Security

on page 53.

Enable services in CentreWare IS. For details, see

Enabling Services

on page 19.

10.

Configure Print, Scan, and Fax features. For details, see

Printing

on page 81,

Scanning

on page 99,

and

Fax

on page 119.

11.

Configure Accounting. For details, see

Accounting

on page 141.