Xerox 6400XF WorkCentre 6400 System Administrator Guide - Page 46

AppleTalk, Enabling AppleTalk on the printer

Page 46 highlights

Network Configuration AppleTalk AppleTalk is a proprietary suite of protocols developed for networking computers by Apple, Inc. Notes: • • AppleTalk has been deprecated by Apple, Inc., in favor of TCP/IP networking. If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17. Before you begin, ensure the following items are available: 1. An existing operational AppleTalk network. 2. The AppleTalk Name you wish to assign to your printer. 3. The AppleTalk Zone, if used, to assign to your printer. Enabling AppleTalk on the printer 1. In CentreWare IS, click Properties > Connectivity > Protocols > AppleTalk. 2. Select Enabled to enable the protocol. 3. Type a name for the printer in Printer Name or use the default name XRX_MAC address. 4. Type the AppleTalk zone name in the Zone Name field. Note: The default star (*) symbol for zone allows the closest router to assign the printer to a zone. Only change the Zone Name if you have defined zones on your network. 5. Click Apply, then click OK. 46 WorkCentre 6400 Multifunction Printer System Administrator Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184

Network Configuration
WorkCentre 6400 Multifunction Printer
System Administrator Guide
46
AppleTalk
AppleTalk is a proprietary suite of protocols developed for networking computers by Apple, Inc.
Notes:
AppleTalk has been deprecated by Apple, Inc., in favor of TCP/IP networking.
If your printer is locked, you must log in as a system administrator. For details, see
Accessing CentreWare IS
on page 17.
Before you begin, ensure the following items are available:
1.
An existing operational AppleTalk network.
2.
The AppleTalk Name you wish to assign to your printer.
3.
The AppleTalk Zone, if used, to assign to your printer.
Enabling AppleTalk on the printer
1.
In CentreWare IS, click
Properties
>
Connectivity
>
Protocols
>
AppleTalk
.
2.
Select
Enabled
to enable the protocol.
3.
Type a name for the printer in
Printer Name
or use the default name
XRX_MAC address
.
4.
Type the AppleTalk zone name in the
Zone Name
field.
Note:
The default star (
*
) symbol for zone allows the closest router to assign the printer to a zone.
Only change the Zone Name if you have defined zones on your network.
5.
Click
Apply
, then click
OK
.