Xerox 6400XF WorkCentre 6400 System Administrator Guide - Page 23
Configuring TCP/IP Settings in CentreWare IS, Configuring Dynamic Address Settings
UPC - 095205759334
View all Xerox 6400XF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Network Configuration Configuring Dynamic Address Settings Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17. 1. At the printer control panel, press the Machine Status button, then touch the Tools tab. 2. Touch Network Settings > TCP/IP Settings. 3. Touch Dynamic Addressing. 4. Touch DHCP, BOOTP, or RARP, then touch Save. Configuring DNS/DDNS Settings Domain Name System (DNS) and Dynamic Domain Name System (DDNS) is a system that maps host names to IP addresses. Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17. 1. At the printer control panel, press the Machine Status button, then touch the Tools tab. 2. Touch Network Settings > TCP/IP Settings. 3. Touch DNS Configuration. Note: Your company's DHCP server may provide the following information if DHCP is enabled. 4. Touch Domain Name, then touch the field under Domain Name, type the domain name using the touch-screen keypad, then touch Save. 5. Touch Preferred DNS Server, then touch the field under Preferred DNS Server, type the server address using the touch-screen keypad, then touch Save. 6. Touch Alternate DNS Servers, then touch the field under Alternate DNS Server #1, type the server address using the touch-screen keypad. 7. Touch the field under Alternate DNS Server #2, type the server address using the touch-screen keypad, then touch Save. 8. Touch Dynamic DNS Registration, then touch Enabled if required. Configuring TCP/IP Settings in CentreWare IS If your printer has a valid network address, you can configure TCP/IP settings in CentreWare IS. Configuring Settings for IPv4 IPv4 can be used in addition to or in place of IPv6. If both protocols are disabled, you cannot access CentreWare IS. Note: If your printer is locked, you must log in as a system administrator. For details, see Accessing CentreWare IS on page 17. 1. In CentreWare IS, click Properties > Connectivity > Protocols > IP (Internet Protocol). 2. IPv4 is enabled by default. CAUTION: If both IPv4 and IPv6 are disabled, you cannot access CentreWare IS. You must reenable TCP/IP at the printer control panel before you can access CentreWare IS. Disabling TCP/IP or changing the IP address also disables any dependant protocols. WorkCentre 6400 Multifunction Printer 23 System Administrator Guide