Xerox 6400XF WorkCentre 6400 User Guide - Page 205

Image Prints Too Dark

Page 205 highlights

Troubleshooting Probable Causes Solutions Unsupported media (wrong size, thickness, type, etc.) is being used. The grey dials on the fuser are set for envelope printing. The printer needs to be calibrated. Use Xerox-approved media. See Supported Media on page 41. Rotate both grey dials on the fuser to the paper setting. Perform the color calibration procedure. For more information see Setting Color Calibration on page 202. Image Prints Too Dark Probable Causes Solutions One or more of the imaging units may be defective. Remove the imaging units one at a time, and check for damage. If it is damaged, replace it. One or more of the toner cartridges may be defective. Remove the toner cartridges and check each for damage. If one or more is damaged, replace it. The printer needs to be calibrated. Perform the color calibration procedure. For more information see Setting Color Calibration on page 202. WorkCentre 6400 Multifunction Printer 205 User Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248

Troubleshooting
WorkCentre 6400 Multifunction Printer
User Guide
205
Image Prints Too Dark
Unsupported media (wrong size, thickness, type, etc.)
is being used.
Use Xerox-approved media. See
Supported Media
on
page 41.
The grey dials on the fuser are set for envelope
printing.
Rotate both grey dials on the fuser to the paper
setting.
The printer needs to be calibrated.
Perform the color calibration procedure. For more
information see
Setting Color Calibration
on
page 202.
Probable Causes
Solutions
One or more of the imaging units may be defective.
Remove the imaging units one at a time, and check
for damage. If it is damaged, replace it.
One or more of the toner cartridges may be defective.
Remove the toner cartridges and check each for
damage. If one or more is damaged, replace it.
The printer needs to be calibrated.
Perform the color calibration procedure. For more
information see
Setting Color Calibration
on
page 202.
Probable Causes
Solutions