Xerox 6400XF WorkCentre 6400 User Guide - Page 50
Tray 2, Length guide, Width guides, Tray 3 or 4
UPC - 095205759334
View all Xerox 6400XF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Printing Trays 2, 3, or 4 accept a maximum of 500 sheets of plain paper (20 lb. Bond). To load paper or other media in Tray 2, 3, or 4: 1. Extend the tray from the printer. 6400-037 2. Adjust the paper guides to fit the paper (if necessary). • Tray 2: Length guide: Compress the sides of the guide and lift the guide from the tray. Insert the guide in the holes in the tray so that the guide is aligned with the appropriate paper size (imprinted on the bottom of the tray), and release the sides. Width guides: Press the tab extending from the top of the guide and move the guide so that the mark on the guide aligns with the paper size imprinted on the tray. Repeat for the other guide. • Tray 3 or 4: Length guide: Press the green sides of the guide, then slide the guide until the arrow on the guide points to the appropriate paper size imprinted on the bottom of the tray. When properly positioned, the guide clicks into place. Width guides: Press the green lever on the side of the guide, and move the guide so that it is aligned with the appropriate paper size imprinted on the paper lifting plate. 3. Press down on the paper-lifting plate until it locks into place. 50 WorkCentre 6400 Multifunction Printer User Guide 6400-038