Xerox 6400XF WorkCentre 6400 User Guide - Page 55

Printing • In the printer driver, select either Labels as the paper type or Tray 1 as the paper source. Printing on Glossy Paper Print glossy paper single-sided only and from Tray 1. To order paper, transparencies, or other specialty media, contact your local reseller or go to the Xerox Supplies website for your printer: www.xerox.com/office/WC6400supplies. Guidelines • Do not open sealed packages of glossy paper until you are ready to load them into the printer. • Leave glossy paper in the original wrapper, and store unopened packages in the original shipping carton until ready to use. • Remove all other paper from the tray before loading glossy paper. • Load only the amount of glossy paper you plan to use and remove the unused portion from the tray when you are finished printing. Replace the unused portion in the original wrapper and seal for later use. • Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to curl and jam in the printer. • In the printer driver, select either Gloss Coating or Heavyweight Gloss Coating as the paper type, or Tray 1 as the paper source. Printing on Custom Size Paper In addition to the wide variety of standard paper sizes that you can use for printing, you can also print on custom size paper within the following dimensions. Short edge Long edge Weight Single Sided Printing 92-216 mm (3.6-8.5 in.) 148-356 mm (5.8-14.0 in.) 60-210 g/m2 2-Sided Printing 176-216 mm (7.0-8.5 in.) 257-300 mm (10.1-11.8 in.) 60-150 g/m2 Note: Print custom size paper from Tray 1 only. If inserted one page at a time, long edge 2-sided paper can be up to 356 mm (14.0 in.) WorkCentre 6400 Multifunction Printer 55 User Guide