Xerox M118i System Administration Guide - Page 101
SNMP, IPP, Community Name Read Only
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
SNMP IPP Using CentreWare Internet Services to Configure Settings on the Machine NOTE: The default user ID is "admin" and the default password is "x-admin". This page allows you to configure the SNMP settings for the following options. NOTE: Some settings on this page will only be available after you reboot the machine from CentreWare Internet Services, or after the machine is switched off and on. 1. At the CentreWare Internet Services home page for the machine, select the [Properties] tab. 2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol Settings] folder. 3. Select [SNMP]. 4. Set up the following options to be displayed in the frame. • Community Name (Read Only) • Community Name (Read/Write) • Community Name (Trap Notification) • Key Operator NOTE: For more information about the options, refer to Properties in the CentreWare Internet Services chapter of the User Guide. 5. Select [Apply New Settings] to reflect the new setting. 6. Enter the user ID and password, then select [OK]. NOTE: The default user ID is "admin" and the default password is "x-admin". This page allows you to configure the IPP settings for the following options. NOTE: Some settings on this page will only be available after you reboot the machine from CentreWare Internet Services, or after the machine is switched off and on. 1. At the CentreWare Internet Services home page for the machine, select the [Properties] tab. 2. In the [Properties] frame, select the plus symbol [+] to the left of the [Protocol Settings] folder. 3. Select [IPP]. 4. Set up the following options to be displayed in the frame. • Port Number • Add Port No. • TBCP Filter (Only available when the oprional PostScript Kit is installed.) • Administrator Mode Xerox CopyCentre/WorkCentre 118 System Administration Guide 101