Xerox M118i System Administration Guide - Page 48
Printing, Solaris/HP-UX
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
4 UNIX TCP/IP 3. Repeat the procedure for all workstations that will be sending jobs to the machine. The UNIX TCP/IP installation is now complete. If the test print fails, refer to Problem Solving chapter for assistance. Printing Solaris/HP-UX This section describes printing from workstations running Solaris or HP-UX. Refer to the manuals supplied with the workstation for full details. Print (lp) The lp command is used for printing. Command format lp [-d printer name] [-n number of copies] File name Command options The following command options are available. • -d printer name Specify the printer name registered by the lpadmin command as the -d option. If this option is omitted, the default printer lp will be used. • -n number of copies This option specifies the number of copies. If one lp command is issued to print multiple files, the number of copies specified will apply to all the files. However, this is only effective when the machine is in the spool mode. In the non-spool mode, the client must be a Windows NT machine to use this option. NOTE: Some options which are not listed here (e.g. -m option) and which are not processed by the workstation sending the print instructions, will not be valid. NOTE: In the spool mode, up to 32 files can be printed by one lp command. Any files specified after the 32nd file will be ignored. Example To print a file named file1 to a printer named fxPS, enter the following command: %lp -dfxPS file1 To output three copies of file1 and then three copies of file 2 to fxPS, enter the following command: %lp -dfxPS -n3 file1 file2 48 Xerox CopyCentre/WorkCentre 118 System Administration Guide