Xerox M118i System Administration Guide - Page 42
Workstation Setup, Print language/mode/logical printer
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
4 UNIX TCP/IP 6. Use the same steps as IP address setting to enter the subnet mask and gateway address. NOTE: You can enter 000, 128, 192, 224, 240, 248, 252, 254, or 255 into each section as the values for the subnet mask. NOTE: You cannot enter 127, 254, or 255 into the first section of the format for the gateway address. 7. Press the button. NOTE: If you wish to filter access to the machine from the client computers, activate the IP Filter. The [Filter] screen is located in the same layer as the [TCP/IP Settings] screen. Workstation Setup This section explains how to change the workstation OS for Solaris, SunOS, and HPUX workstations. Refer to the relevant instructions below. Solaris - page 44 SunOS - page 44 HP-UX - page 46 Print language/mode/logical printer A printer name for logical printer should correspond to the print language/mode to be used for printing, or to the Logical Printer Number which was registered through CentreWare Internet Services. Printer Name PS* PSASC/PSA* PSBIN/PSB* PCL LP DUMP/DMP AUTO/ATO TIFF/TIF TIFF%n PS%n* Print Language/Mode/Logical Printer PostScript PostScript PostScript PCL Print language which was specified on the touch screen of the machine. Dump mode Auto detection mode TIFF direct print TIFF (%n: Logical Printer Number 1 to 10 which were registered through CentreWare Internet Services.) PostScript (%n: Logical Printer Number 1 to 10 which were registered through CentreWare Internet Services.) 42 Xerox CopyCentre/WorkCentre 118 System Administration Guide