Xerox M118i System Administration Guide - Page 58
Specifying stapling, Parameter, Description, To specify the output format of printing
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
4 UNIX TCP/IP Printing NOTE: For some print languages, the color parameter may be invalid. NOTE: The system default is used if no parameter is specified. Specifying stapling The following parameters can be specified for stapling. Parameter Description STAPLETL STAPLETD STAPLETR STAPLELD STAPLERD STAPLEBL STAPLEBD STAPLEBR Places one staple in the upper left corner of the prints. Places two staples at the top of the prints. Places one staple in the upper right corner of the prints. Places two staples on the left side of the prints. Places two staples on the right side of the prints. Places one staple in the lower left corner of the prints. Places two staples at the bottom of the prints. Places one staple in the lower right corner of the prints. NOTE: The stapling setting is not available on the machine. NOTE: If several parameters are specified in the first lpr command, data may not print. NOTE: For some print languages, the stapling parameter may be invalid. To specify the output format of printing, enter the following command: -C,[parameter],[parameter] Enter a "," (comma) after -C followed by the parameters which specify the output format. To specify multiple parameters, separate them with ",". For example, to print a file named "file1", two-sided on A4 (210 × 297mm/8.3 × 11.7inches) on printer fxPS, enter the following command: %lpr -PfxPS -C,DUP,A4 file1 NOTE: If the parameter string of the -C option exceeds 64 characters, the operation may not function correctly. 58 Xerox CopyCentre/WorkCentre 118 System Administration Guide