Xerox M118i System Administration Guide - Page 77
Parallel Port, Information Checklist
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
8 Parallel Port This chapter explains how to set up the machine in a parallel port environment. The following information is provided. Information Checklist - page 77 Parallel Port Environment - page 78 Parallel Port Installation - page 78 Installation Procedure - page 78 Parallel Port Communication Setup - page 78 Workstation Setup - page 79 Test Print - page 79 Information Checklist Before starting the parallel port installation procedures, make sure that the following items are available or have been performed. Item By IEEE1284 Parallel Port Cable Test the machine to make sure that it is installed fully and functioning correctly. Print driver for the machine Customer Customer Customer NOTE: The installation procedures will install the machine on the parallel port of the host workstation. The procedures are not intended to connect the host workstation to other workstations. If problems are encountered during the installation of the machine, refer to Problem Solving chapter for assistance. CAUTION: Do not connect the parallel port cable to the machine until instructed to do so. Xerox CopyCentre/WorkCentre 118 System Administration Guide 77