Xerox M118i System Administration Guide - Page 54
-C Option, Examples, Selecting a paper tray, Parameter, Description
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4 UNIX TCP/IP Examples • To inquire about the print data received by a printer named fxPS, enter the following command: %lpq -PfxPS • To display a printer named fxPS in long format, enter the following command: %lpq -PfxPS -l -C Option On SunOS, the -C option can be used to specify the print format if the machine prints with the PostScript language in spool mode. This section explains the functions which can be specified and printing operations which will be affected using the -C option. NOTE: When the PostScript logical printer that was configured using CentreWare Internet Services and the -C option have been specified simultaneously, some of the actions cannot be guaranteed to work. Also, when specifying the PostScript logical printer as a default printer on UNIX, it is recommended not to use the -C option. Function The following items can be set up using the -C option. Selecting a paper tray When selecting a paper tray, specify either a paper size or a tray. If the paper size is specified, the machine automatically searches and selects the tray. The following parameters can be specified. Parameter INTRAY1/intray1 INTRAY2/intray2 INTRAY3/intray3 INTRAY4/intray4 INTRAY5/intray5 INMF/inmf A3/a3 B4/b4 A4/a4 Description Selects Tray 1. Selects Tray 2 (optional). Selects Tray 3 (optional). Selects Tray 4 (optional). Selects Tray 5 (manual feed). Selects Tray 5 (manual feed). Selects the tray which has A3 (297 × 420 mm/11.7 × 16.5 inches) paper loaded. Selects the tray which has B4 (257 × 364 mm/10.1 × 14.3 inches) paper loaded. Selects the tray which has A4 (210 × 297 mm/8.3 × 11.7 inches) paper loaded. 54 Xerox CopyCentre/WorkCentre 118 System Administration Guide