Xerox M118i System Administration Guide - Page 59

EtherTalk, Information Checklist

Get Xerox M118i - WorkCentre B/W Laser PDF manuals and user guides
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 59 highlights

5 EtherTalk This chapter explains how to set up the machine to operate on an EtherTalk network. The following information is provided. Information Checklist - page 59 EtherTalk Environments - page 60 EtherTalk Installation - page 60 Installation Procedure - page 60 Network Communication Setup - page 60 Workstation Setup - page 62 Test Print - page 62 Information Checklist Before installing EtherTalk on the machine, make sure that the following items are available or have been performed. Item By An existing operational EtherTalk network with Macintosh workstations equipped with Ethernet network interface cards is required. These procedures are not designed to install an EtherTalk network. Macintosh System versions 7.5 or later, 8.x, 9.x, or Mac OS X 10.2 Obtain and record the following information: • IP address • Gateway address • Subnet mask • Host name Refer to the glossary for additional information about the Gateway Address and Subnet mask, if needed. Test the machine to make sure that it is installed fully and functioning correctly. Adobe PS print driver, or PPD (optional). Customer Customer Customer Customer Customer If problems are encountered during the machine installation, refer to the Problem Solving chapter for assistance. CAUTION: Do not connect the network cable to the machine until instructed to do so. Xerox CopyCentre/WorkCentre 118 System Administration Guide 59

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
Xerox CopyCentre/WorkCentre 118 System Administration Guide
59
5
EtherTalk
This chapter explains how to set up the machine to operate on an EtherTalk network.
The following information is provided.
Information Checklist – page 59
EtherTalk Environments – page 60
EtherTalk Installation – page 60
Installation Procedure – page 60
Network Communication Setup – page 60
Workstation Setup – page 62
Test Print – page 62
Information Checklist
Before installing EtherTalk on the machine, make sure that the following items are
available or have been performed.
If problems are encountered during the machine installation, refer to
the Problem
Solving chapter
for assistance.
CAUTION: Do not connect the network cable to the machine until instructed to
do so.
Item
By
An existing operational EtherTalk network with Macintosh workstations
equipped with Ethernet network interface cards is required. These
procedures are not designed to install an EtherTalk network.
Customer
Macintosh System versions 7.5 or later, 8.x, 9.x, or Mac OS X 10.2
Customer
Obtain and record the following information:
•
IP address
•
Gateway address
•
Subnet mask
•
Host name
Refer to the glossary for additional information about the Gateway
Address and Subnet mask, if needed.
Customer
Test the machine to make sure that it is installed fully and functioning
correctly.
Customer
Adobe PS print driver, or PPD (optional).
Customer