Xerox M118i System Administration Guide - Page 55
Selecting a paper output tray, Selecting a paper type, Parameter, Description
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
-C Option B5/b5 Parameter A5/a5 LETTER/letter LEGAL/legal Description Selects the tray which has B5 (182 × 257 mm/7.2 × 10.1 inches) paper loaded. Selects the tray which has A5 (148 × 210 mm/5.8 × 8.3 inches) paper loaded. Selects the tray which has letter size (216 × 279 mm/8.5 × 11.0 inches) paper loaded. Selects the tray which has legal size (216 × 356 mm/8.5 × 14.0 inches) paper loaded. NOTE: If several parameters are specified in the first lpr command, data may not be printed correctly. NOTE: The system default is used if no tray number is specified, or a specified tray or specified size of paper is not loaded. NOTE: This option is for specifying paper size only. Paper is selected but the document size is not resized to fit the actual paper size. NOTE: If the print data specifies a paper tray, those specifications take priority over any -C option. NOTE: If an invalid combination is specified, the machine may not operate correctly. NOTE: For some print languages, the specification may be invalid. Selecting a paper output tray The following parameters can be specified. Parameter OUTUP/outup OUTDOWN/outdown Description Delivers prints to the face-up tray. Delivers prints to the face-down tray. Selecting a paper type The following parameters can be specified. Parameter PTS/pts PT1/pt1 PT2/pt2 POH/poh PTP/ptp Description Selects plain paper. Selects thick paper 1. Selects thick paper 2. Selects transparency. Selects tracing paper. Xerox CopyCentre/WorkCentre 118 System Administration Guide 55