Xerox M118i System Administration Guide - Page 115
Problems using a NetWare Environment, Xerox CopyCentre/WorkCentre 118 System Administration Guide
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Problems using a NetWare Environment Cause Confirmation Method Action The NetWare port is not activated. Print the System Settings List, then check that the port is activated. Activate the NetWare port. Print the System Settings List. When using IPX/SPX, check that the network number remains set to 00000000 (NetWare server down). When using TCP/IP, check that the IP address remains set to 0.0.0.0 (fixed IP address not specified) or an address supply server (DHCP server down). When using IPX/SPX, start the NetWare server. When using TCP/IP, set the fixed IP address or start the address supply server (DHCP). Invalid printer configuration. Use NWADMIN or PCONSOLE to check that the printer configuration is correct.* Use NWADMIN or PCONSOLE to set the following items. Printer type: Parallel Port: LPT 1 Printer Location: Auto Load (Local).* The default machine name is invalid. Print the System Settings List, then check that the correct machine name is entered. Specify the correct machine name (printer server name). No directory tree name is specified. Print the System Settings List, then check that a tree name is specified. Specify a tree name. No context is specified. Print the System Settings List, and then check that a context is specified. Specify a context. The transport protocol of the NetWare port is not specified correctly. Use CentreWare Internet Services to check that the transport protocol is also specified by the server. Select the transport protocol that the server specifies. A fault occurred during print processing. Check the NetWare error of Switch the machine off and the machine displayed on the on. control panel. Xerox CopyCentre/WorkCentre 118 System Administration Guide 115