Xerox M118i System Administration Guide - Page 36

Use the DHCP server together with the Windows Internet Name Service, Select [DHCP/Autonet], [DHCP] - manual

Get Xerox M118i - WorkCentre B/W Laser PDF manuals and user guides
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

3 NetWare If necessary, you may change the following settings. • Transport Protocol • Print Mode • PJL • Number of searches Next, establish TCP/IP if you use an IP address for a NetWare network. If IP address setting is unnecessary, press the button to go to NetWare Setup on page 37. 1. Press the button once or twice to display the [Network/Port] screen. 2. Select [TCP/IP Settings] by selecting [T] or [S] and then press the button. 3. Select [Get IP Address] by selecting [T] or [S] and then press the button. 4. Select [DHCP/Autonet], [DHCP], [BOOTP], [RARP], or [Manual] by selecting [T] or [S] and then press the button. NOTE: Use the DHCP server together with the Windows Internet Name Service (WINS) server. If you selected [Manual] in step 4, use the following steps to enter the IP address. If you selected other than [Manual], press the button and then go to Workstation Setup on page 37. 1. Press the button. 2. Select [IP Address] by selecting [T] or [S] and then press the button. 3. Use the numeric keypad to enter the IP address in the format "xxx.xxx.xxx.xxx". NOTE: Press the button to move to the next section. Press the button to return to the previous section. NOTE: You cannot enter 127, 254, or 255 into the first section of the format. 4. Press the button. 5. Press the button. 6. Use the same steps as IP address setting to enter the subnet mask and gateway address. NOTE: You can enter 000, 128, 192, 224, 240, 248, 252, 254, or 255 into each section as the values for the subnet mask. NOTE: You cannot enter 127, 254, or 255 into the first section of the format for the gateway address. 7. Press the button. 36 Xerox CopyCentre/WorkCentre 118 System Administration Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
3 NetWare
36
Xerox CopyCentre/WorkCentre 118 System Administration Guide
If necessary, you may change the following settings.
•
Transport Protocol
•
Print Mode
•
PJL
•
Number of searches
Next, establish TCP/IP if you use an IP address for a NetWare network.
If IP address setting is unnecessary, press the <Login/Out> button to go to
NetWare
Setup on page 37
.
1.
Press the <Exit> button once or twice to display the [Network/Port] screen.
2.
Select [TCP/IP Settings] by selecting
[
] or [
] and then press the <Enter>
button.
3.
Select [Get IP Address] by selecting
[
] or [
] and then press the <Enter>
button.
4.
Select [DHCP/Autonet], [DHCP], [BOOTP], [RARP], or [Manual] by selecting
[
]
or [
] and then press the <Enter> button.
NOTE:
Use the DHCP server together with the Windows Internet Name Service
(WINS) server.
If you selected [Manual] in step 4, use the following steps to enter the IP address.
If you selected other than [Manual], press the <Login/Out> button and then go to
Workstation Setup on page 37
.
1.
Press the <Exit> button.
2.
Select [IP Address] by selecting [
] or [
] and then press the <Enter> button.
3.
Use the numeric keypad to enter the IP address in the format “xxx.xxx.xxx.xxx”.
NOTE:
Press the <
> button to move to the next section. Press the <
> button to
return to the previous section.
NOTE:
You cannot enter 127, 254, or 255 into the first section of the format.
4.
Press the <Enter> button.
5.
Press the <Exit> button.
6.
Use the same steps as IP address setting to enter the subnet mask and gateway
address.
NOTE:
You can enter 000, 128, 192, 224, 240, 248, 252, 254, or 255 into each section
as the values for the subnet mask.
NOTE:
You cannot enter 127, 254, or 255 into the first section of the format for the
gateway address.
7.
Press the <Log In/Out> button.