Xerox M118i System Administration Guide - Page 63
Microsoft Networking, Information Checklist
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
6 Microsoft Networking This chapter explains how to set up the machine to operate on a Microsoft network. The following information is provided. Information Checklist - page 63 SMB Environments - page 64 SMB Installation - page 65 Installation Procedure - page 65 Network Communication Setup - page 65 Workstation Setup - page 67 Test Print - page 67 Changing the Settings - page 68 Procedure - page 68 Setting Format of config.txt - page 69 Information Checklist Before starting the Microsoft networking installation procedures, make sure that the following items are available or have been performed. Item By An existing operational Microsoft network is required. These procedures Customer are not designed to install a Microsoft network. Obtain and record the following information, if required: • IP address • Gateway address • Subnet mask • Host name Refer to the glossary for additional information about the Gateway Address and Subnet mask, if needed. Customer Test the machine to make sure that it is installed fully and functioning correctly. Customer Print driver for the machine Customer If problems are encountered during the installation, refer to Problem Solving chapter for assistance. CAUTION: Do not connect the network cable to the machine until instructed to do so. Xerox CopyCentre/WorkCentre 118 System Administration Guide 63