Xerox M118i System Administration Guide - Page 116
When a switch off/on message is displayed, When the required printing result is not obtained
UPC - 095205219265
View all Xerox M118i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
13 Problem Solving When a switch off/on message is displayed Cause A fault occurred in the NetWare interface. Confirmation Method - Action Switch the machine off and on. When the required printing result is not obtained Cause Confirmation Method Action The specified print language of the print job is different from one specified in the machine. Check the print language of the machine. Specify the same print language of the print job as that of the machine. Banner page print is specified for the job. When printing under the CAPTURE/NPRINT print job configuration, use the SHOW option to check that the banner flag is not specified. When defining the CAPTURE/ NPRINT print job configuration, specify NOBANNER. When printing from PCONSOLE under the print job configuration created with PRINTCON, check that the banner page print is available. Inactivate the banner page print in the print job configuration with PRINTCON. The file server and network are in the overload state. No action. - Extend the duration before timeout. A fault occurred during print processing. Check the NetWare error displayed on the control panel. Switch the machine off and on. 116 Xerox CopyCentre/WorkCentre 118 System Administration Guide