Canon PIXMA MP500 MP500 User's Guide - Page 89
Language selection, Reset setting, Save settings, Load settings - print head reset
View all Canon PIXMA MP500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Read/write attribute Selects whether to allow data to be written onto memory cards from a computer. Important If you set this setting to , card direct printing cannot be done. After you finish operation of the memory card dedicated drive, be sure to revert this setting to . Power save setting The LCD goes out if the machine is not operated for 5 minutes. Press any button on the Operation Panel except for [ON/OFF] to restore the display. Even though you can select from , , , or as the time until power save starts, the actual time until power save starts does not change. Adjust contrast Use this to adjust the contrast of the LCD if it is too low or too high. Slide show setting Specifies the image display quality of the slide show. Note When is selected, images are displayed at 5-second intervals. When is selected, images are displayed at different time intervals according to their resolutions. Language selection Changes the language for LCD messages. Reset setting You can change the settings back to the default, except for the language for LCD messages and the position of the Print Head. Save settings Saves the settings for the Settings screen. Load settings Loads the settings for the Settings screen that were saved. Chapter 9 Changing the Machine Settings 87