Cisco 6504-E User Guide - Page 148
Error Statistics Area, Alignment Error.
View all Cisco 6504-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
C6576M Ethernet Interface Dialog Box Chapter 5 Physical Object Dialog Boxes • Out Octets-Total number of transmitted octets including framing characters. • Out Unicast Pkts-The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sublayer, including those that were discarded or not sent. • Out Packets/Sec-Five-minute exponentially decayed moving average of output packets per second. • Out Bits/Sec-Five-minute exponentially decayed moving average of output bits per second. Error Statistics Area The Error Statistics area C6576M Ethernet Interface dialog box provides the following information: • Collisions-Number of collisions on this segment. • Giants-Total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. • CRC Error Pkts.-Packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a nonintegral number of octets (Alignment Error). • In Discarded Pkts.-Number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher layer protocol. One reason to discard such a packet is to free up buffer space. • In Dropped Pkts.-Number of events in which packets were dropped by the probe due to lack of resources. This number is not necessarily the number of packets dropped, but is the number of times this condition has been detected. • In Ignored Pkts.-Number of packets ignored. • In Aborted Pkts.-Number of packets aborted. • In Error Pkts.-Number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. • Runts-Total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. • Misaligned Pkts.-Alignment errors. • Out Discarded Pkts.-Number of outbound packets that were chosen to be discarded. • Out Dropped Pkts.-Number of events in which outbound packets were dropped. • Out Error Pkts.-Number of outbound packets that could not be transmitted because of errors. 5-34 Cisco 6500/7600 Series Manager User Guide