Cisco 6504-E User Guide - Page 168

C6576M FlexWAN Module Dialog Box Chapter 5 Physical Object Dialog Boxes Inventory Area The Inventory area of the C6576M FlexWAN Module dialog box provides the following information. All the attributes in this area are read-only. • Model-Model of the FlexWAN module. This attribute has the following value: - WS-X6182-2PA • Serial Number-The serial number of the module. • Hardware Version-The hardware version on the module. • Software Version-The software version on the module. • Firmware Version-The firmware version on the module. Performance Logging Area The Performance Logging area of the C6576M FlexWAN Module dialog box contains these buttons to enable and disable performance logging of the interface attributes of the port adapters (if installed) on the FlexWAN module: • Start-Turns on performance data logging. • Stop-Turns off performance data logging. Note The logged data is available to the user through the CEMF Performance Manager. Refer to the Cisco Element Management Framework User Guide for more information about the Performance Manager. Actions Area The Actions area of the C6576M FlexWAN Module dialog box provides the following actions: • Commission-This button is used to commission the object manually. This can only be done if the object is in a decommissioned state. • Decommission-This button is used to decommission the object manually. In the decommissioned state, the properties of the object are not monitored. As a result, data displayed in the configuration window is not guaranteed to be current. The decommission action allows a FlexWAN module to be removed and replaced without generating alarms. 5-54 Cisco 6500/7600 Series Manager User Guide