Cisco 6504-E User Guide - Page 398

C6576M NDE Configuration Dialog Box Chapter 6 Logical Object Dialog Boxes • PFC Modify button-Modifies the source address used in the NDE packets containing statistics from the PFC. • MSFC Modify button-Modifies the source interface for NDE packets containing statistics on routed flows exported from the MSFC cache. • Dest. Modify button-Modifies the NDE destination host IP address and UDP port. • Enable NDE button-Enables the export of traffic statistics on Layer 3-switched and routed flows that have expired or been purged from the MSFC and PFC caches. Note To enable NDE, several parameters must be configured: the source interface for NDE packets containing statistics on routed flows exported from the MSFC cache; the desination address and port of the Netflow Collector; and an IP route cache on the MSFC source interface. • Disable NDE button-Disables NDE flow export on Layer 3-switched and routed flows. Status Field The Status display-only field located at the bottom of the window indicates the current state of the object. This field has the following values: • decommissioned-CEMF is not actively monitoring the object attributes. • normal-Presence polling of the object. • normallostcomms-CEMF has lost communication with the device from the normal state. NDE Filters Tab Figure 6-84 shows the NDE Filters tab of the C6576M NDE Configuration dialog box. Figure 6-84 NDE Filters Tab of C6576M NDE Configuration Dialog Box 6-108 Cisco 6500/7600 Series Manager User Guide