Cisco 6504-E User Guide - Page 57

Chapter 4 Deploying the C65/76M Figure 4-3 IP Discovery Window Deployment and Commissioning Process The contents of this window depend on how the window was launched. For example, if this window was launched from an object in the physical containment view, then the Physical Location parameter would be automatically set to the location from which the window was launched, as shown in Figure 4-3. For more information on the CEMF Auto Discovery process, refer to the "Auto Discovery" chapter of the CEMF 3.1 Users Guide. Note When specifying the SNMP community string, use the read-write community string for the switch. If the read community string is used or appears first in the list of community strings, then that will be the SNMP community string used for both the read and read-write operations by the C65/76M. As a result, set operations will fail. After the discovery process is complete, newly discovered objects will be automatically added to the Network containers and Physical containers. In the Network container, the object will be placed under the appropriate subnet. In the Physical container, discovered objects will be placed in the location based on the value of the Physical Location parameter. If one of the discovered devices is a Catalyst 6000 family switch or a Cisco 7600 series Internet Router, then a C65/76M Network Element object will also be added into the Network containers, Physical containers, and the appropriate Manager Views. The Software object is also automatically added to the Manager View. In Figure 4-4, the Network Element object is labelled "192.168.12.105" and the Software object is labelled "192.168.12.105-Software." Cisco 6500/7600 Series Manager User Guide 4-7