Cisco 6504-E User Guide - Page 154

C6576M Ethernet Interface Dialog Box Chapter 5 Physical Object Dialog Boxes currently need to be configured as a trunking port, nor does the VLAN or the VLAN STP instance need to exist. Figure 5-18 shows the subdialog box that is displayed when the Add/Remove Per VLAN STP Setting button is selected. The subdialog box contain the following: - VLAN-Identifies the VLAN STP instance. This is the numeric identifier of the access mode VLAN or a VLAN that is carried on the trunk. - Priority-Describes the STP VLAN port priority of this interface. Note This value is the same as the Per VLAN STP Port Priority in the Per VLAN STP Setting Area. - Cost-Describes the STP VLAN path cost of this interface. - Add button-Adds an explicit STP VLAN configuration to the interface. - Remove button-Removes an explicit STP VLAN configuration to the interface. Figure 5-18 Add/Remove Per VLAN STP Setting Subdialog Box STP Status Area The STP Status area of the C6576M Ethernet Interface dialog box provides the following information: 5-40 Cisco 6500/7600 Series Manager User Guide