Cisco 6504-E User Guide - Page 437

Chapter 8 Alarms and Alarm Management C65/76M Alarms Object State Alarms Most C65/76M objects have state alarms associated with them. These state alarms can be used to determine what tasks are being executed for the corresponding object or the status of network connectivity to the corresponding object from the CEMF server. There will only be one state alarm for each object at any time (corresponding to the current state of the object). The following C65/76M objects have state alarms associated with them: • Network Element • Chassis • Power Supplies • All Modules • Port Adapters • Interfaces • Software Object • Logical Objects Network Element Table 8-3 describes the Network Element object state alarms. Table 8-3 Network Element State Alarms State discovery discoverylostcomms mismatched normal lostcomms Message/Description Severity Alarms Cleared "C6576M Network Element is in the discovery state." Informational discoverylostcomms normal mismatched "C6576M Network Element is in the discoverylostcomms state. Network connectivity to switch has been lost during discovery." Critical discovery "C6576M Network Element is in the Major mismatched state. IP address does not correspond to a Catalyst 6500 switch." discovery "C6576M Network Element is in the Normal normal state." discovery lostcomms "C6576M Network Element is in the Critical lostcomms state. Network connectivity to the switch has been lost." normal Cisco 6500/7600 Series Manager User Guide 8-9