Cisco 6504-E User Guide - Page 255

Chapter 5 Physical Object Dialog Boxes C6576M OSM POS Interface Dialog Box Note The Bandwidth attribute is an informational parameter used only to communicate the current bandwidth to the higher-level protocols (such as IGRP, EIGRP, and OSPF); you cannot adjust the actual bandwidth of an interface with this command. Layer 2 Area Layer 3 Area The Layer 2 area contains the following information: • MTU-The size of the largest datagram (frame) which can be sent or received on the interface, specified in octets. The Layer 3 area contains the following information: • IP Address-Displays the IP address of the layer 3 interface. • Netmask-Subnet mask of the IP address. Enabled bits indicate network addressing bits in the IP address. • Clear IP Address button-After receiving confirmation, will unset the IP address for this interface. ATM/SONET Tab Figure 5-73 shows the ATM/SONET tab of the C6576M OSM POS Interface dialog box. Figure 5-73 ATM/SONET Tab of the C6576M OSM POS Interface Dialog Box Cisco 6500/7600 Series Manager User Guide 5-141