Cisco 6504-E User Guide - Page 46

Deploying C65/76M Objects Chapter 3 Getting Started Table 3-2 Object Parameter Definitions Property Description Catalyst 6500 Switch Name of the Network Element object that will be Name displayed in the Map Viewer application. Supervisor IP Address IP address of the switch supervisor engine. CatOS/IOS SNMP V1 Read Community SNMP v1 read community used by the device. This deployment mode assumes the same communities for either switch operating system. CatOS/IOS SNMP V1 Write Community SNMP v1 write community used by the device. This deployment mode assumes the same communities for either switch operating system. CatOS/IOS SNMP V2c SNMP v2c read community used by the device. Read Community This deployment mode assumes the same communities for either switch operating system. CatOS/IOS SNMP V2c SNMP v2c write community used by the device. Write Community This deployment mode assumes the same communities for either switch operating system. CatOS/IOS SNMP Version The version of the SNMP agent running on the device. This is a drop-down menu containing: • SNMPv1 • SNMPv2c CatOS/IOS Username The username used to allow the C65/76M to access the Network Element device using a Telnet connection. This deployment mode assumes the same username for either switch operating system. CatOS/IOS Password The password used to allow the C65/76M to access the Network Element using a Telnet connection. The value entered in this text box will not be in plain text. This deployment mode assumes the same password for either switch operating system. OS Deploy Type If the specific OS installation type for the switch is known, it can be selected here. Leave the setting as autoDetect to let the EMS determine the OS deployment type. Cisco 6500/7600 Series Manager User Guide 3-8