Cisco 6504-E User Guide - Page 370
Area Tab, Status Field, Area Configuration Area
View all Cisco 6504-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 370 highlights
C6576M OSPF Dialog Box Chapter 6 Logical Object Dialog Boxes Status Field Area Tab The Status display-only field located at the bottom of the window indicates the current state of the object. This field has the following values: • decommissioned-CEMF is not actively monitoring the object attributes. • normal-Presence polling of the object. • normallostcomms-CEMF has lost communication with the device from the normal state. Figure 6-64 shows the Area tab of the C6576M OSPF dialog box. Figure 6-64 Area Tab of the C6576M OSPF Dialog Box Area Configuration Area This describes OSPF NSSA and stub area configurations. The information for a particular area can be displayed by selecting the desired area from the Areas list. When you select an area, the following information is provided: • Area ID-Identifies a stub or NSSA area adjacent to the router. The identifier can be specified as either a decimal value or as an IP address. • Area Type-Type of area. The type has the following values: - default-Not a stub or NSSA area. - stub-Information on external routes are not sent to stub areas. 6-80 Cisco 6500/7600 Series Manager User Guide