Cisco 6504-E User Guide - Page 239

Chapter 5 Physical Object Dialog Boxes C6576M OSM GE-WAN Interface Dialog Box Figure 5-63 HSRP Secondary IP Modify Subdialog Box HSRP Area The HSRP area of the C6576M OSM GE-WAN Interface dialog box provides the following information: • HSRP Group Table-Describes HSRP groups deployed on an interface. Note There may be multiple groups deployed on an interface. Using a group number on one logical or physical interface does not preclude using it on another. • Virtual IP-Primary virtual IP address of the HSRP group. If this address is not configured, the agent attempts to discover the virtual address through a discovery process which scans the hello messages. • Preempt-If enabled, the current router attempts to overthrow a lower priority active router and attempts to become the active router. If disabled, this router becomes the active router only if there is no such router or the active router fails. - true-Preempt enabled. - false-Preempt disabled. • Delay Minimum-Time difference (in seconds) between a router power up and the time it can start preempting the currently active router. This value is only applicable when preemption is enabled. • Priority-Metric used to select the active and standby routers. 0 is lowest priority, 255 is highest. Router with highest priority is selected to be the active router. • Hello Interval-Hello interval in milliseconds. If this value is not configured, it can be learned from the active router. • Hold Interval-Hold interval in milliseconds. If this value is not configured, it can be learned from the active router. Cisco 6500/7600 Series Manager User Guide 5-125