Cisco 6504-E User Guide - Page 316

C6576M Software Dialog Box Chapter 6 Logical Object Dialog Boxes Backup/Restore Configuration Area The Backup/Restore Configuration area of the C6576M Software dialog box provides the following information: • TFTP Host-The IP address or hostname of the TFTP server that the startup or running configurations were backed up to or restored from. Note The TFTP Host field must be configured in order to back up and restore the configuration. The TFTP Host must be accessible from the managed device, and there must be sufficient disk space on the host to store the device's startup configuration. • Backup Status-Status of the last backup action. This attribute (read-only) hashas the following values: - Ok-The backup completed successfully. - Failed-The backup failed. - Not executed-The backup operation was not executed. • Backup File-The name of the file to which the startup configuration will be copied. Note If the TFTP server is not the CEMF server, then the file specified by the Backup File field must already exist. If it does not, the backup action will fail. If the TFTP server is the CEMF server, the file will be automatically created. • Backup button-Backs up the current startup configuration to the TFTP server. The backup filename is specified by the Backup File attribute. • Scheduled Backup-Schedules the backup operation. It will launch the dialog box shown in Figure 6-21. Figure 6-21 Scheduled Backup Configuration Dialog Box The Scheduled Backup Configuration dialog box provides the following information: • Date-The date when the restore will start. The format is MM/DD/YYYY. • Hour-The hour when the restore will start. It is a 24-hour clock. • Minute-The minute when the restore will start. 6-26 Cisco 6500/7600 Series Manager User Guide