Cisco 6504-E User Guide - Page 253

Chapter 5 Physical Object Dialog Boxes C6576M OSM POS Interface Dialog Box Status Field - posOc12mm - posOc12smi - posOc12sml - posOc48mm - posOc48smi - posOc48sml - posOc3mm - posOc3smi - posOc3sml • Operational Status-The current operational state of the interface. This attribute is read-only. This attribute has one of the following values: - other - ok - minorFault - majorFault • Administrative Status-The desired state of the interface. This attribute has one of the following values: - up - down • Last Change-The value (in seconds) of sysUpTime at the time the interface entered its current operational state. If the current state was entered before the last reinitialization of the local network management subsystem, then this object contains a zero value. This attribute is read-only. • Connector Present-Indicates whether or not a cable is connected to the interface. If the ifAdminStatus is down, then this value cannot be determined and an "unknown" message is given. This attribute is read-only. This attribute has the following values: - yes-Cable is connected to the interface. - no-Cable is not connected to the interface. - unknown-Cannot determine if a cable is connected to the interface. • Number of Resets-Number of times the interface internally reset. This attribute is read-only. The display-only Status field located at the bottom of the window indicates the current state of the object. This field can have the following values: • decommissioned-CEMF is not actively monitoring the object attributes. • normal-Presence polling is performed periodically. • performance-Some attributes are collected periodically for trending purposes. • normallostcomms-CEMF has lost communication with the device from the normal state. • perflostcomms-CEMF has lost communication with the device from the performance state. Cisco 6500/7600 Series Manager User Guide 5-139