Cisco 6504-E User Guide - Page 392

C6576M IS-IS Dialog Box Chapter 6 Logical Object Dialog Boxes • Add New IS-IS button-Creates an IS-IS routing process on the managed device. • Remove IS-IS button-Deletes the currently selected IS-IS object. Network Area The Network area of the C6576M IS-IS dialog box provides the following information: • Network Table-Describes the Network Entity Titles for an IS-IS routing process. The NETs define the area addresses for the IS-IS area and the system ID of the router. There must be at least one entry in this table in order for the IS-IS routing process to be functional. This table displays the following columns: - AFI-Authority and Format Identifier (AFI). This is the first byte in the IS-IS NSAP Area Identifier. - Area Address-Area Address of the NET. Identifies the IS-IS routing area that the routing process participates in. - System-ID-System ID of the NET. Unique identifier of the device in the routing area. - N-Selector-n-selector portion of the NET. Occupies the last byte of NET. Value is always 00. Edit Network Table Subarea This subarea allows you to modify the Network Table. The Add and Remove buttons adds a NET address and removes a NET address from the IS-IS routing process, respectively. The following parameters must be specified. • AFI • Area Address • System ID Status Field The Status display-only field located at the bottom of the window indicates the current state of the object. This field has the following values: • decommissioned-CEMF is not actively monitoring the object attributes. • normal-Presence polling of the object. • normallostcomms-CEMF has lost communication with the device from the normal state. Interfaces Tab Figure 6-80 shows the Interfaces tab of the C6576M IS-IS dialog box. 6-102 Cisco 6500/7600 Series Manager User Guide