Cisco 6504-E User Guide - Page 59

Chapter 4 Deploying the C65/76M Figure 4-5 Network Element Dialog Box Deployment and Commissioning Process When the dialog box is displayed, select the Configuration tab. In the CLI Passwords section, specify the Telnet Password and Enable Password parameters. The Telnet Password is the password used to connect to the switch using the Telnet protocol. The Enable Password is the password used to enter the enable mode on the switch or router. All values entered in these text fields will be displayed as "*". To specify the SNMP read and write community strings, select the SNMP tab and enter the correct SNMP read/write community strings. Note The IP Discovery process only fills in the SNMP community strings based on the version of SNMP discovered on the switch or router. In Figure 4-6, the read and read-write community strings are specified as public and private, respectively, because "private" was specified in the IP Discovery window (see Figure 4-3). The community string used in the IP Discovery window should be the read-write SNMP community. Cisco 6500/7600 Series Manager User Guide 4-9