Cisco 6504-E User Guide - Page 181

Chapter 5 Physical Object Dialog Boxes C6576M SLB Dialog Box Note The configured SLB mode does not take effect until the Content Switching Module is reloaded. The reload is performed manually by executing the IOS config mode command power cycle module slot_number. Note When changing the configured SLB mode from CSM to RP, the SLB configurations for CSM will be erased. Actions Area The Actions area of the C6576M SLB dialog box provides the following actions: • Commission-This button is used to commission the object manually. This can only be done if the object is in a decommissioned state. • Decommission-This button is used to decommission the object manually. In the decommissioned state, the properties of the object are not monitored. As a result, data displayed in the configuration window is not guaranteed to be current. The decommission action allows a Content Switching Module to be removed and replaced without generating alarms. Status Field The display-only Status field located at the bottom of the window indicates the current state of the object. This field has the following values: • decommissioned-CEMF is not actively monitoring the object attributes. • normal-Presence polling is performed periodically. • performance-Some attributes are collected periodically for trending purposes. • normallostcomms-CEMF has lost communication with the device from the normal state. • perflostcomms-CEMF has lost communication with the device from the performance state. • mismatched-The type of Content Switching Module discovered does not match the predeployed Content Switching Module. Cisco 6500/7600 Series Manager User Guide 5-67