Cisco 6504-E User Guide - Page 193

Chapter 5 Physical Object Dialog Boxes C6576M ATM T3 Interface Dialog Box Interface Status Area The Status area of the C6576M ATM T3 Interface dialog box provides the following information to describe the general characteristics of the interface. • Description-Comment or a description to help you remember what is attached to this interface. The description is only put in the configuration to help you remember what specific interfaces are used for. • Index-String index of the interface. This is a read-only attribute. • Operational Status-The current operational state of the interface. This is a read-only attribute. This attribute has one of the following values: - testing-Indicates that no operational packets can be passed. - unknown - down - up - dormant-Interface is waiting for external actions (such as a serial line waiting for an incoming connection) - notPresent-Interface has missing (typically, hardware) components. - lowerLayerDown-The interface in the lower layer is down. • Administrative Status-The desired state of the interface. This attribute has one of the following values: - testing (read-only)-Indicates that no operational packets can be passed. - up - down • Last Change-The value (in seconds) of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last reinitialization of the local network management subsystem, then this object contains a zero value. This is a read-only attribute. • Connector Present-Indication if a cable is connected to the interface. If the ifAdminStatus is down, then this value cannot be determined and an "unknown" message is displayed. This is a read-only attribute. This attribute can have the following values: - yes-Cable is connected to the interface. - no-Cable is not connected to the interface. - unknown-Cannot determine if a cable is connected to the interface. • Number of Resets-Number of times the interface internally reset. This is a read-only attribute. Performance Logging Area The Performance Logging area of the C6576M ATM T3 Interface dialog box contains the buttons to enable data logging of all the interface attributes of the interface. • Start-Turns on performance data logging. • Stop-Turns off performance data logging. Cisco 6500/7600 Series Manager User Guide 5-79