Cisco 6504-E User Guide - Page 348

C6576M EtherChannel Dialog Box Chapter 6 Logical Object Dialog Boxes Routing Protocol Tab Figure 6-47 shows the Routing Protocol tab of the C6576M EtherChannel dialog box. Figure 6-47 Routing Protocol Tab of the C6576M EtherChannel Dialog Box EIGRP Area ISIS Area The EIGRP area of the C6576M EtherChannel dialog box provides the following information: • EIGRP Interface Table-A list of the EIGRP processes. The following attributes can be configured for a EIGRP process: • Bandwidth Utilization (%)-Percentage of the EtherChannel interface bandwidth that the EIGRP protocol can use. • Hold Time (sec)-Length of time in seconds that neighbors should consider the sender valid. • Hello Interval (sec)-Interval in seconds between hello packets. The ISIS area of the C6576M EtherChannel dialog box provides the following information: • ISIS Enabled-Indicates whether or not IS-IS routing is enabled on the interface. This attribute is read-only. - true-IS-IS routing is enabled. - false-IS-IS routing is disabled. • Area Tag-The IS-IS routing area in which the interface participates. If mutli-area IS-IS is configured on the device, the IS-IS area must be named. Otherwise, this value may be an implicit null tag. This attribute is read-only. 6-58 Cisco 6500/7600 Series Manager User Guide