D-Link DGS-3627G Product Manual - Page 123

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch 2. To make the subnet VLAN work well, users must add the ingress port to the VLAN member ports. 3. The subnet VLAN may affect the authorization protocol, such as 802.1X, WAC, JWAC, MAC-based access control, and compound authentication. Since the authorized port will be assigned to target VLANs and set its PVID to the target VLAN ID, if the subnet VLAN takes effect, the ingress packets on this port may not be classified to target VLANs and may cause the authorization protocol to work less efficiently. Subnet VLAN Settings To view this window, click L2 Features > VLAN > Subnet VLAN > Subnet VLAN Settings, as shown below: Parameter Figure 3- 20. Subnet VLAN Settings window Description Action VLAN Network Address Priority Use the pull-down menu to Add, Delete or Find the subnet VLAN. Use the pull-down menu to select VLAN Name or VID to enter in the field next to it. Use the pull-down menu to select IPv4 Address or IPv6 Address to enter in the field next to it. Use the pull-down menu to select priority 0 to 7. Click Apply to implement the changes. Click View All to see all the entries. Click Delete All to remove all the entries. 107