D-Link DGS-3627G Product Manual - Page 382

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch Figure 7- 27. Authentication RADIUS Server Settings window This window displays the following information: Parameter Description Index Choose the desired RADIUS server to configure: First, Second or Third. IPv4 Address Click the radio button and enter the RADIUS server IPv4 address. IPv6 Address Click the radio button and enter the RADIUS server IPv6 address. Authentication UDP Port (165535) Enter the RADIUS authentic server(s) UDP port. The default port is 1812. Alternatively, users can tick the Default check box. Accounting UDP Enter the RADIUS account server(s) UDP port. The default port is 1813. Alternatively, users can Port (1-65535) tick the Default check box. Key Enter the key the same as that of the RADIUS server. Confirm Key Confirm the shared key is the same as that of the RADIUS server. Timeout (1-255) Enter a timeout value between 1 and 255 seconds. The default value is 5 seconds. Alternatively, users can tick the Default check box. Retransmit (1-20) Enter a retransmit value between 1 and 20. The default value is 2. Alternatively, users can tick the Default check box. Status This allows users to set the RADIUS Server as Valid (Enabled) or Invalid (Disabled). 366