D-Link DGS-3627G Product Manual - Page 90

sFlow State sFlow Version sFlow IPv4 Address sFlow IPv6 Address xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch This field allows you to globally enable or disable sFlow. This displays the current sFlow version. This displays the sFlow IPv4 address. This displays the sFlow IPv6 address. sFlow Analyzer Settings The following windows are used to configure the parameters for the remote sFlow Analyzer (collector) that will be used to gather and analyze sFlow Datagrams that originate from the Switch. Users must have the proper sFlow software set on the Analyzer in order to receive datagrams from the switch to be analyzed, and to analyze these datagrams. Users may specify up to four unique analyzers to receive datagrams, yet the virtual port used must be unique to each entry. To configure the settings for the sFlow analyzer, click Administration > sFlow > sFlow Analyzer Settings, as shown below: Figure 2- 83. sFlow Analyzer Settings window The following fields are displayed: Parameter Description Server ID This field denotes the ID of the Analyzer Server that has been added to the sFlow settings. Up to four entries can be added with the same UDP port. Owner Displays the owner of the entry made here. The user that added this sFlow analyzer configured this name. Timeout (sec) Displays the configured time, in seconds, after which the Analyzer server will time out. When the server times out, all sFlow samples and counter polls associated with this server will be deleted. Countdown Time Displays the current time remaining before this Analyzer server times out. When the server times out, all sFlow samples and counter polls associated with this server will be deleted. Collector Address Displays the IP address of the sFlow Analyzer Server. This IP address is where sFlow datagrams will be sent for analysis. Collector Port Displays the previously configured UDP port where sFlow datagrams will be sent for analysis. Max Datagram Size This field displays the maximum number of data bytes in a single sFlow datagram that will be sent to this sFlow Analyzer Server. Modify Click the Modify button to display the sFlow Counter Analyzer Edit window, so that users may edit the settings for this server. Delete Click the corresponding button of the entry to be deleted. To add a new sFlow Analyzer, click the Add button in the previous window that will display the following window to be configured: 74