D-Link DGS-3627G Product Manual - Page 235

xStack® DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch OSPF Interface Settings This window is used to set up OSPF interfaces. If there are no IP interfaces configured (besides the default System interface), only the System interface settings will appear listed. To change settings for an IP interface, click on the hyperlinked name of the interface to see the configuration window for that interface. To view this window, click L3 Features > OSPF > OSPF > OSPF Interface Settings, as shown below: Figure 4- 55. OSPF Interface Settings window Click the hyperlinked name of the interface to configure the settings for OSPF, which will give access to the following window: Figure 4- 56. OSPF Interface Settings - Edit window Configure each IP interface individually using the OSPF Interface Settings - Edit window. Click the Apply button when you have entered the settings. The new configuration appears listed in the OSPF Interface Settings window. To return to the OSPF Interface Settings window, click the Show All OSPF Interface Entries link. OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF settings. Read the descriptions below for details. Parameter Description 219